Hi,
I have created one custom table view and the data of this table is saved in the custom Z table its not a BOL. Now when i click on SAVE then iam updating the data in this Z table but after Save the updated/inserted data is not shown in table view immediately. If i reload that same transaction again then only upadated data is shown in the table. i want that the updated/new inserted data should be shown immediated in the table without loading the tableview/screen again.
Hi All,
Can you please some one let me know How to determine Service team autotmatically based on Category 1 of Multilevel Categorization in Service Request.
We want to determine without any enhancement.
I have checked Action Profile, Categorization & Rule policy But I am not sure if I am looking correctly or not.
Can somebody share their experties here.
Thanks
Jay
Hi,
I have enhanced view BP_BPBT/AccountLeadsOV and context node BTQRLEADDOC in BP_BPBT component.
I am facing type conflict error.
Version is Ehp2.
PFA.
Regards
Muneera.
Hi Experts,
We are Supporting EIC Application where we have Upgraded the Landscape from CRM 5 to CRM7.1.
Currently we are facing an Issue where the emails are not coming in to CRM was due to Shared Memory Full particularly on the shared memory are CL_ICF_SHM_AREA (Application Server)
The Maximum Memory which is displaying is 400MB however the Incoming emails are not coming in to EIC Once the Memory reached to 295 MB.
1) Can you please help us with the Parameters to be Considered while analyzing this Issue ?
2) Can you please help us with the Permanent resolution for this issue ?
3) what is the Impact of Inbound Queues (SMQ2) / User Logs / Background Jobs on the Shared Memory Consumption / activities performed by the User?
Please Let me know If you need More Info.
Thanks in advance,
Best Regards,
Satish
When we attempt to do Account Identification in IC, we get the following message - "BSP exception: An attribute with the name "CONTACTTYPE" is not defined"
Dear Expert,
I need clarification on the CRM pricing .I am bit confused on the IPC pricing and ABAP Pricing part in CRM. We are in CRM7.0 EHP1.
We are basically configuring all the pricing condition table , type , procedures etc in ECC and replicating to CRM. What I want to understand is
when we write our Custom build requirement route(600-999) , Base value / condition formulas in ECC. We are using ABAP coder for this.
However as per my earlier understanding the same need to be written in IPC using Java code using eclipse , there is also IPC user exit doc by SAP.
But now when I spoke to some experience CRM Techno/functional guy recently he mentioned that as of CRM7.0 EHP1 this customer build Requirement route , Formulas need not have be written in JAVA code. Since in CRM7.0 EHP1 , pricing is moved under ABAP stack. So that means according to him he mentioned that this requirement routen we can write in ABAP code itself in CRM or during data download from ECC it should be available.
Can some one who have good knowledge on this pl. confirm this and explain me what exactly is possible.
Thanks & br
mathi
Hi experts,
I am trying to remove Radio button default. By default it is selected when I am trying to set attribute for answer options. Even if I unchecked, it reverts and set as selected again. Actually, I need remove Radio button default for the customer sees a response pre filled.
Please advise on how can I remove Radio button default for answer options.
Banu
I have a requirement to store the attachments in CRM one order transaction from a local file path on the SAP application server in AL11. So, all the files will be initially placed in a specific directory of the app server. Now, I want to attach this file via the "Create URL" option on the CRMD_ORDER transaction. For this, I need the URL of the file present in the application server. How do we get the URL of any file in the app server?
Anyone has experience on working in a similar scenario?
Hello Experts,
We hav configured the Loyalty Management in our system. We are able to create Loyalty Programs successfully. However, on trying to create a memebership object or Member activity, we are getting an error :
Context initialization failed in view LOY102S_MSH/MSHSearch of UI Component LOY102S_MSH
An exception has occurred
Exception Class CX_CRM_UNSUPPORTED_OBJECT - Object MSHSEARCH is not (yet) supported
Method: CL_CRM_GENIL_OBJ_MODEL=>IF_GENIL_OBJ_MODEL~GET_OBJECT_KIND
Could you please let us know what step we may be missing?
Regards
Nisha
Hi,
i am currently working on BP integration between ECC and CRM.While replicating BP's from ECC to CRM,i want status of BP's to be copied on CRM.i am able to this however,due to the new account life cycle view on Web UI,i can't see copied status on Web UI.There has to be a way of mapping BP status on CRM GUI and account life cycle on WEB UI.
Can you please help me on this?Thanks in advance.
Hello,
we have a system landscape consisting of CRM 7.03 and ERP 6.06 SP04. We are using the LORD API to create Sales Quotes and Orders via the CRM Web UI.
We have activated Business function SD_01.
We have used the ERP standard functionality here and could use this without problems until now.
When we create a Sales Quote either as follow up to the CRM opportunity or as single transaction, the system comes up with the following error on the WebUI:
'ERP Interface stopped or failed unexpectedly.
RFC ERP_LORD_GET_ITEM_MULTI caused exception EXC_LORD_NOT_LOADED'.
In the connected ERP system we get a dump:
'CALL_FUNCTION_NOT_REMOTE - terminated program SAPLERP_LORD.
We noticed that the function module ERP_LORD_GET_ITEM_MULTI is not remote enabled, however, we do not understand why this is now the case. It never was in previous versions.
It is not sufficient to simply enable the remote functionality, you do also need to set different parameters.
Could somebody please advise what to do here? Maybe some notes to apply?
We do not want to change the standard, just use the functionality as it comes.
Thanks and Best Regards
Martina Lahr
Hi,
How to rename file when attach a document into complaint via "with template" button?
Now document is attached with name = template name.
Hi Experts,
My requirement is to retrieve the addess maintained in org stucture for a BP.
Found the related tables as HRP1001 and HRP1028, where we need to hit HRP1001 multiple times to get each level of data in org structure.
Could you please let me know if there is any standard function module which does retrieval of all levels.
Once all the levels are available, we can hit HRP1028 of desired position to retrieve its address.
Attached is the screenshot for more details.
Regads,
Santosh
Hi,
When I log on with German in UI,create a transaction(Quotation or Oppt),and then insert the product.
The product description is missing.
Even though the product description for German is not maintained.
But it should get the general product description for this material,isn't it?
Best regards,
JiaoQian
Hi everybody , i have done all the configuration of business agreement in crm gui now when i am trying to make business agreement in web ui ,after clicking on new button nothing is happening but if am creating business agreement from the workcenter its getting created
Hi experts,
I'm using a Report, which runs in Background and has to store a long text-table on the application server - but each line is truncated after 512 characters. When opening the file via Tx.: AL11 it seems to be Standard (for example Hint: 966835). But when storing it with OPEN DATASET I guess it should be possible to store the whole information
Does anyone of you know, how I can achieve this? I'm using the following code example, but if there are other FM which store the data in background (maybe some spool etc: ) I'd Change my coding.
Thanks and best regards Axel
| Header 1 |
|---|
REPORT Z_TEST. |
Hi, I am an ISE and I'm trying to finish up an RFP response for CRM. One of the questions asked by the customer I can't answer and I don't know where to look for the answer. Can anyone help me with an answer or what I should say even if there is no good answer. Here is the customer question:
"Reliability of Solution: Documentation relating to current known issues
with the solution. This should include, but is not limited to, all current
patches or active open issues and any documentation regarding load or stress
test results and uptime statistics for the proposed solution.
Thanks!
Hi Experts,
I had created one custom field on Sales Area for Account. I was able to create the custom field and everything is successful. But my problem is the created custom field gets created in table BUT000 instead of Sales Area specific table. This makes the field as sales area independent but I want this to be sales area dependent. While creating the field through AET, I was not given any option for choosing the sales area specific BO instead I was getting the BO BUT000 to choose.
We are sitting on CRM 7 Ehp1 (SAPKU70106).
Thanks,
Santosh
Error is coming while BA replication from crm to ISU "Business partner does not exist in role contract part. ".Plz tell if any configuration i have left..
Hi, In CRM under tcode BP we have a field for Tax Jurisdiction Code and I need A report which will display me information on this Jurisd field by BP. I tried Join table by using table But021_FS and ADRC but it gives all standard addresses for this BP with Jursidiction Code , Current and prev one. How can I only see current address with TAX Jurisdiction Code info....Thanks